High Cut ballistic helmet made of UHMWPE ballistic polyethylene, tested according to NIJ IIIA 0106.01. The P1-GEN1 is a modern ballistic platform designed to offer reliable protection, low weight, and compatibility with current tactical accessories. Fit: High Cut type FAST SF Material: UHMWPE ballistic polyethylene Protection: Tested according to NIJ IIIA 0106.01 Additional testing: NIJ 0101.06 level IIIA reference threat Rails: Skeleton Super High Cut Compatibility: NVG, audio systems, lights, rail accessories Comfort: Complete SOFTCORE liner kit with integrated BOA system Sizes: M/L and L/XL only Traceability: 2025 ballistic report extract provided Each helmet and each pack is assembled, prepared, tested, and inspected in our workshops. Each order containing a helmet is delivered with a 2025 ballistic report extract.
The P1-GEN1 is a High Cut ballistic helmet made of UHMWPE ballistic polyethylene, designed for users looking for a modern platform, compatible with current tactical accessories and suitable for complete configurations.
Its UHMWPE shell offers a good protection/weight ratio, good natural resistance to moisture and interesting behavior in cold or humid environments.
Unlike aramid, UHMWPE ballistic polyethylene is a more elastic material. It can therefore deform more significantly upon impact. For this reason, the P1-GEN1 is only offered in M/L and L/XL sizes , to maintain a more suitable internal margin for this material and for wearing in a full configuration.
With a raw M/L hull weighing approximately 1,000 kg , the P1-GEN1 maintains a low weight for a UHMWPE ballistic polyethylene platform. Once prepared with its finishing elements and equipped with its Skeleton Super High Cut rails and NVG shroud , it reaches approximately 1,385 kg , while still maintaining good compatibility with modern tactical configurations.
The P1-GEN1 is tested according to the NIJ IIIA 0106.01 standard, applicable to ballistic helmets.
Additional tests are also conducted with deviations from the NIJ 0101.06 Level IIIA reference threats, including:
9×19 mm
.357 SIG
.44 Magnum
Each order including a helmet is delivered with an extract of the 2025 ballistic report , in order to ensure product traceability.
Like all UHMWPE polyethylene ballistic helmets, the P1-GEN1 must be kept away from flames, direct fire, very hot surfaces and prolonged exposure to high heat.
This precaution is related to the thermoplastic nature of UHMWPE. It does not compromise the helmet's ballistic performance under normal use, but requires use consistent with the material's limitations.
The P1-GEN1 is equipped with the SOFTCORE liner kit , incorporating removable and adjustable internal foams as well as a BOA dial adjustable retention system.
This assembly allows the support to be adapted to the us