Call of Defense cotton t-shirt, designed for everyday wear. Made from carefully selected fabrics, then customized in our workshops (Oise, France). Available in several colors with specific features.
Multi-layered, flexible trauma plate in SAPI 25 x 30 cm format, designed, developed, tested, and manufactured in our CallOfDefense workshops. The T-GUARD SAPI 25 x 30 is designed to complement a rigid or flexible ballistic plate, helping to distribute impact energy and reduce the trauma transmitted to the wearer. Size: SAPI 25 x 30 cm Type: Flexible trauma plate Structure: High-density multi-layer Use: Complement to a ballistic plate Compatibility: Plate carriers accepting the 25 x 30 cm format Design: Developed and developed in our workshops Testing: Internal testing conducted by CallOfDefense Manufacturing: Manufactured in our workshops in France The T-GUARD does not replace a ballistic plate. It complements existing protection.
Complete ballistic pack including two 25x30 cm Level IV plates, two 15x15 cm Level IV side plates, and matching T-GUARD trauma inserts. The WARFIGHTER HARLE Pack is designed to enhance a plate carrier configuration with consistent frontal, dorsal, and lateral protection, while adding a dedicated trauma layer for energy dispersion upon impact. Main plates: 2 x 25x30 cm Level IV plates; Side plates: 2 x 15x15 cm Level IV plates; Trauma: 25x30 cm T-GUARD inserts and 15x15 cm T-GUARD side inserts
The T-GUARD Lateral 15 x 15 cm is a flexible, multi-layered side impact plate designed, developed, tested, and manufactured in our CallOfDefense workshops. It is designed to complement rigid or flexible side impact protection, helping to distribute impact energy and reduce trauma transmitted to the wearer. Size: 15 x 15 cm side impact plate; Type: Flexible side impact plate; Structure: High-density multi-layer; Use: Complements a side impact plate; Compatibility: Compatible with 15 x 15 cm side pockets; Design: Developed and developed in our workshops; Testing: Internal testing conducted by CallOfDefense; Manufacturing: Manufactured in our workshops in France. The T-GUARD does not replace a ballistic plate. It complements existing protection.
PRE-ORDER — LIMITED EDITION, MADE IN FRANCE The BWS-1 — Balance Weight System is a modular, expandable, and fully reversible counterweight system designed to improve the balance of helmets equipped with NVGs, cameras, lights, or other front-mounted accessories. - Less than 30g empty - Approximately 280g with all 5 weights installed - Comes with 5 individually removable metal weights - Comes with 2 removable holders for weights or CR123A batteries: - 1 holder with male Velcro; - 1 mount with female Velcro for reversible use - Infinitely adjustable counterweight depending on the configuration used - Compatible with 123A / CR123A batteries, an NVG battery, cartridges, or small equipment - Fully Velcro-lined interior - Large external Velcro attachment area - Integrated cable routing channels - Stretchable and multi-position design, compatible with helmets from S to XL - Fully reversible construction - IRR-treated 500D Cordura camouflage exterior - Non-IRR-treated reversible interior - Colors: BME, BZE, Multicam, Coyote Brown, and Ranger Green - Other colors available upon request, subject to material availability - Designed, cut, sewn, assembled, and inspected in France - Small-batch production at the CoolKid / CallOfDefense workshops. The BWS-1 is currently available for pre-order. It will be shipped after the next production run. The estimated delivery time will be provided at the time of ordering. Batteries, cartridges, helmet, helmet cover and accessories not included.
Rigid lateral ballistic plate combining a ballistic ceramic face with a UHMWPE backing, designed to provide Level IV protection in a stand-alone configuration. Its 15 × 20 cm size offers an extensive lateral protection area while remaining compatible with the side pockets of tactical plate carriers and cummerbunds. Weighs approximately 1.10 kg per plate. Available individually or in pairs. Although the plate functions without mandatory ICW soft protection, the use of a T-GUARD 15 × 20 cm trauma insert, or equivalent protection, is strongly recommended to reduce the effects of back trauma and improve wearer safety.
Rigid lateral ballistic plate combining a ballistic ceramic face with a UHMWPE backing, designed to provide Level IV protection in a stand-alone configuration. Its compact 15 × 15 cm size and simple curve allow it to be integrated into compatible side pockets of tactical plate carriers and cummerbunds. Weight approximately 0.78 kg per plate, with a tolerance of ± 50 g. Available individually or in pairs. While the plate functions without mandatory ICW soft protection, the use of a T-GUARD 15 × 15 cm trauma insert, or equivalent protection, is strongly recommended to reduce the effects of back trauma and improve wearer safety.
High Cut ballistic helmet made of woven aramid, tested according to NIJ IIIA 0106.01. The A1-GEN2 is the direct evolution of the A1-GEN1. It retains a rigid, stable, and proven aramid shell, while offering a more refined finish, improved comfort, and enhanced internal aramid protection. Fit: High Cut type FAST SF Material: High-performance woven aramid Protection: Tested according to NIJ IIIA 0106.01 Additional testing: NIJ 0101.06 level IIIA reference threats Rails: Skeleton Super High Cut Compatibility: NVG, audio systems, lights, rail accessories Comfort: Enhanced SOFTCORE liner kit with integrated BOA system Gen2 Finish: Protective hygro-UV internal coating, official internal authentication engraving, engraved shroud Traceability: 2025 ballistic report extract provided Each helmet, each pack is assembled, prepared, tested, and inspected in our workshops. Each order including a helmet comes with an extract from the 2025 ballistic report.
High Cut ballistic helmet in UHMWPE, Ranger Green color, tested to NIJ IIIA 0106.01. The P1-GEN2 is a ballistic platform made of UHMWPE ballistic polyethylene, designed to offer serious protection, a modern configuration, and full compatibility with current tactical accessories. Cut: High Cut type FAST SF Material: UHMWPE Protection: tested to NIJ IIIA 0106.01 Additional testing: NIJ 0101.06 level IIIA reference threat Rails: Skeleton Super High Cut Compatibility: NVG, audio systems, lights, rail accessories Comfort: improved SOFTCORE liner kit with integrated BOA system Gen2 finish: engraved front shroud, reinforced strap system, transparent authentication label Traceability: 2025 ballistic report extract provided Important note: UHMWPE helmets should be worn one size larger than usual. More elastic than aramid, UHMWPE deforms more upon impact and is not recommended for prolonged use in arid or very hot environments. Each helmet and each pack is assembled, prepared, tested, and inspected in our workshops. Every order containing a helmet includes an extract from the 2025 ballistic report.
High Cut ballistic helmet made of UHMWPE ballistic polyethylene, tested according to NIJ IIIA 0106.01. The P1-GEN2 is a modern ballistic platform designed to offer reliable protection, good compatibility with current tactical accessories, and comfort suitable for extended wear. Fit: High Cut type FAST SF Material: UHMWPE ballistic polyethylene Protection: Tested according to NIJ IIIA 0106.01 Additional testing: NIJ 0101.06 level IIIA reference threat Rails: Skeleton Super High Cut Compatibility: NVG, audio systems, lights, rail accessories Comfort: Enhanced SOFTCORE liner kit with integrated BOA system Gen2 finish: Protective hygro-UV internal coating, official transparent authentication label, engraved shroud Sizes: M/L and L/XL only Traceability: 2025 ballistic report extract provided Each helmet, each pack is assembled, prepared, tested, and inspected in our workshops. Each order including a helmet comes with an excerpt from the 2025 ballistic report. Note on color: The Multicam color used by Call of Defense is intentionally lighter than a standard Multicam, in order to better harmonize with recent French BME (Multi-Environment Camouflage) equipment. This is not an official BME, but a light Call of Defense Multicam, selected for its consistency with current French tactical configurations. This lighter shade allows for better visual integration with equipment predominantly sand, beige, light green, and intermediate tones, while maintaining the versatility of a multi-environment camouflage.
High Cut ballistic helmet in UHMWPE, Coyote Brown color, tested to NIJ IIIA 0106.01. The P1-GEN2 is a ballistic platform made of UHMWPE ballistic polyethylene, designed to offer serious protection, a modern configuration, and full compatibility with current tactical accessories. Cut: High Cut type FAST SF Material: UHMWPE Protection: tested to NIJ IIIA 0106.01 Additional testing: NIJ 0101.06 level IIIA reference threat Rails: Skeleton Super High Cut Compatibility: NVG, audio systems, lights, rail accessories Comfort: improved SOFTCORE liner kit with integrated BOA system Gen2 finish: engraved front shroud, reinforced strap system, transparent authentication label Traceability: 2025 ballistic report extract provided Important note: UHMWPE helmets should be worn one size larger than usual. More elastic than aramid, UHMWPE deforms more upon impact and is not recommended for prolonged use in arid or very hot environments. Each helmet and each pack is assembled, prepared, tested, and inspected in our workshops. Every order containing a helmet includes an extract from the 2025 ballistic report.
High Cut ballistic helmet made of UHMWPE ballistic polyethylene, tested according to NIJ IIIA 0106.01. The P1-GEN1 is a modern ballistic platform designed to offer reliable protection, low weight, and compatibility with current tactical accessories. Fit: High Cut type FAST SF Material: UHMWPE ballistic polyethylene Protection: Tested according to NIJ IIIA 0106.01 Additional testing: NIJ 0101.06 level IIIA reference threat Rails: Skeleton Super High Cut Compatibility: NVG, audio systems, lights, rail accessories Comfort: Complete SOFTCORE liner kit with integrated BOA system Sizes: M/L and L/XL only Traceability: 2025 ballistic report extract provided Each helmet and each pack is assembled, prepared, tested, and inspected in our workshops. Each order containing a helmet is delivered with a 2025 ballistic report extract.
High Cut ballistic helmet made of woven aramid, tested according to NIJ IIIA 0106.01. The A1-GEN1 is a complete ballistic platform, designed to offer reliable protection, good stability while wearing, and compatibility with modern tactical accessories. Fit: High Cut type FAST SF Material: High-performance woven aramid Protection: Tested according to NIJ IIIA 0106.01 Additional testing: NIJ 0101.06 level IIIA reference threat Rails: Skeleton Super High Cut Compatibility: NVG, audio systems, lights, rail accessories Comfort: Full SOFTCORE liner kit with integrated BOA system Traceability: 2025 ballistic report extract provided Availability: End of series, limited stock Each helmet and each package is assembled, prepared, tested, and inspected in our workshops. Each order including a helmet is delivered with a 2025 ballistic report extract. End of series note: This Multicam Alpine colorway is offered as an end-of-series item. Quantities are limited and no restocking is guaranteed once the stock is depleted. The "end of series" designation refers only to the availability of the color. It does not affect the quality of the shell, ballistic performance, workshop preparation, or the helmet's traceability.
Plaque anti-trauma souple multicouche au format Shooter Cut 25 x 30 cm, dessinée, pensée, testée et fabriquée dans nos ateliers CallOfDefense. Le T-GUARD Shooter Cut 25 x 30 est conçu pour compléter une plaque balistique rigide ou souple, en aidant à répartir l’énergie d’impact et à réduire le traumatisme transmis au porteur. Format : Shooter Cut 25 x 30 cm Type : plaque anti-trauma souple Structure : multicouche haute densité Utilisation : complément d’une plaque balistique Compatibilité : porte-plaques acceptant le format 25 x 30 cm Shooter Cut Conception : dessinée et pensée dans nos ateliers Tests : essais internes réalisés par CallOfDefense fabriquée dans nos ateliers en France Le T-GUARD ne remplace pas une plaque balistique. Il vient en complément d’une protection existante.
Complete ballistic pack including an A1-GEN2 High Cut aramid helmet, two multi-curved Level IV ballistic plates, two 15x15 cm Level IV side plates, and matching T-GUARD trauma inserts. The WARFIGHTER PANALVA Pack provides a complete configuration: helmet, frontal, back, and side protection, and trauma interface. Contents: A1-GEN2 helmet, 2 x 25x30 Level IV plates, 2 x 15x15 Level IV side plates, 2 x 25x30 Level IV T-GUARD inserts, 2 x 15x15 Level IV T-GUARD inserts, free lightweight cover, free white Call of Defense T-shirt. Free white Call of Defense T-shirt: size to be specified in order comments, subject to availability. Helmet colors available: Tan, Full Black, Multicam Special, Coyote Brown, Multicam Black, ATACS, ATACS-FG, and Multicam Alpine. Free white Call of Defense T-shirt: size to be specified in order comments, subject to availability. Retail price of individual components: €1,705.90 Discounted package price: €1,499.90 Savings: €206.00 Each helmet and each package is assembled, prepared, tested, and inspected in our workshops. Every order including a helmet comes with an extract of the 2025 ballistic report. Availability: Shipping possible as early as the next business day if in stock. Delivery time up to a maximum of 6 weeks for custom-made configurations.